Fender 3
Fender
Fender 1
Fender 2
A 1990s build of the 2x12” Fender Hot Rod Deville. The big-brother in the Hot Rod series produces 60 watts of modern Fender tone.
With it's fantastic sounding clean channel the HR Deville is known as a great pedal platform & is a standard for backlines all over the world.
The Fender Hot Rod series is also known for some not so strong qualities. A poor choice in filter capacitors and a generally hated overdrive channel.
Luckily the first issue is fixed by the T&T component upgrades. In this case all the power filter capacitors have been replaced with F&Ts, as well as other key signal path capacitors and resistors upgraded to Orange Drops, Jupiter & Vishay.
To fix the second issue we've installed the Bill M/Frommel mods giving the amp a beautiful sounding overdrive. We also went a bit further and added switchable diode clipping on channel 2 via a push-pull pot on the volume control. We've also installed a push-pull pot for the channel 1 volume which, when pulled up, switches in the master volume to channel 1.
The 2x12 Deville comes with it's original Eminence speakers, however, we do have a pair of Celestion Silver Series V30 speakers, which we think would be a fantastic upgrade.
Accessories include a Fender foot switch.
LTD edition 2018 Blues Junior III, in a lovely Burgendy Red & complete with Cannabis Rex speaker. Updated by T&T to the latest BJ-IV spec, with a few extras thrown in.
We’ve carried out our usual upgrades, replacing the stock filter capacitors with high quality F&T’s, and signal path capacitors with Orange Drop and Panasonic film caps.
Stock parts which are know to cause issues have been replaced & voicing wise we’ve kept to the latest Blues Junior IV spec, apart from increasing the reservoir capacitor to 100uF for a firmer bass response.
Finally, we modified the Bias circuit so you can switch between original ‘fixed’ and latest ‘cathode’ bias, allowing a choice between higher headroom or more compression/earlier breakup.
All work is covered by T&T’s 3-month guarentees.
Fender 3
Fender 1
Fender 2
A 1990s build of the 4x10” Fender Hot Rod Deville. The big-brother in the Hot Rod series produces 60 watts of modern Fender tone through a mini-half stack.
With it's fantastic sounding clean channel the HR Deville is known as a great pedal platform & is a standard for backlines all over the world.
The Fender Hot Rod series is also known for some not so strong qualities. A poor choice in filter capacitors and a generally hated overdrive channel.
Luckily the first issue is fixed by the T&T component upgrades. In this case all the power filter capacitors have been replaced with F&Ts, as well as other key signal path capacitors and resistors upgraded to Orange Drops, Jupiter & Vishay.
To fix the second issue we've installed the Bill M/Frommel mods giving the amp a beautiful sounding overdrive. We also went a bit further and added switchable diode clipping on channel 2 via a push-pull pot on the volume control. We've also installed a push-pull pot for the channel 1 volume which, when pulled up, switches in the master volume to channel 1.
Accessories include a Fender foot switch.